Cevap: root ekleme sorunu
Asagıdaki Verdigim modules.conf dur size Yapmanız Gerekenleri Belirticem
Bu kodu Not Defterine Kopyalayın Ve Satırın Basına Cıkın
ctrL+h Yaparak Ust Bosluqa NitX
Alt Bosluqa Ise Root Nickinizi Yazın
Tümünü Değiştir Diyin
Daha Sonra Tekrar ctrL+h Yapın
Ust Bosluga mIRCDostum.Com
Alt Bosluga sunucuadi.com
Seklinde Yapıp Tümünü Değiştir Diyin.
Daha Sonra ISe dosyayı modules.conf Olarak kaydederseniz sorunsuz Kabul Edicektir. Root'u
Unutmayinki Servicesi Getirdikten Sonra Sunucuda Nicki Kaydedip Deneyin
Olmaz Ise Servisleri Cıkartıp tekrar Getirin Olacaktır. Kod:
# TekbirShell.Com
# mail & msn :
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
# tel : +90 543 779 21 40
# Günün 24 saati telefon ile destek alabilirsiniz.
# web :
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
Services confda Yazdiginiz Kismin Aynisini Yaziniz
Module protocol/unreal
# NetworkDomain domain [RECOMMENDED]
# Protocols: bahamut, dalnet, dreamforge, monkey, ptlink, rfc1459,
# trircd, ts8, undernet-p9
#
# Network Domaini
#NetworkDomain "mIRCDostum.Com"
# CSSetChannelTime [OPTIONAL]
# Protocols: bahamut, monkey, trircd, unreal
#
#
CSSetChannelTime
# ServerNumeric <numeric> [RECOMMENDED]
# Protocols: unreal
#
# Sadece Unreal için Açiniz
ServerNumeric 2
# SetServerTimes [<time>] [RECOMMENDED]
# Protocols: unreal
#
# Sadece Unreal için Açiniz
SetServerTimes
#SetServerTimes 12h
EndModule
###########################################################################
#
# Eger Auth Kodu Aktif Ettiyseniz Burayi Ayarlayiniz
#
###########################################################################
Module mail/main
# FromAddress <email> [REQUIRED]
# Giden Mail Adres
FromAddress
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
# FromName <name> [OPTIONAL]
# mIRCDostum
FromName "mIRCDostum.Com"
EndModule
################################ Sendmail-based low-level module
Module mail/sendmail
# SendmailPath <path> [REQUIRED]
# Specifies the full path to the "sendmail" program to be used to
# send mail. This program must accept a command-line option "-t"
# to extract recipient addresses from a mail message given on
# standard input (the standard "sendmail" program does this).
# The program will be executed with the same environment as
# Services itself is run with.
SendmailPath /usr/lib/sendmail
EndModule
################################ SMTP-based low-level module
Module mail/smtp
# RelayHost <hostname> [REQUIRED]
# Specifies the host to which all mail will be sent, e.g. your
# local mail server.
RelayHost mail.mIRCDostum.Com
# SMTPName <hostname> [REQUIRED]
# Specifies the hostname Services will use in the HELO command to
# the remote server. Normally, this should be set to the same as
# the hostname of the machine Services runs on.
SMTPName services.mIRCDostum.Com
# MaxSockets <count> [REQUIRED]
# Specifies the maximum number of sockets to the mail server which
# can be open at once.
MaxSockets 100
EndModule
###########################################################################
#
# OperServ configuration
#
###########################################################################
Module operserv/main
OperServName "OperServ" "Operator Server"
GlobalName "DUYURU" "Global Noticer"
OperServDB "oper.db"
# ServicesRoot NitX [REQUIRED]
# Specifies the Services "super-user". The super-user, or "root" as
# Services Root Nickini Yaziniz
ServicesRoot NitX
KillClonesAutokill 20d
AllowRaw
#WallOper
#WallBadOS
#WallOSChannel
WallSU
EndModule
Module operserv/akill
AutokillDB "akill.db"
AutokillReason "mIRCDostum.Com'a girisiniz engellenmistir."
#AutokillReason "Autokilled: %s"
AutokillExpiry 30d
AkillChanExpiry 7d
#OperMaxExpiry 7d
#EnableExclude
ExcludeReason "IRC operator host"
#ExcludeReason "Excluded from autokills: %s"
ExcludeExpiry 30d
#ImmediatelySendAutokill
#WallOSAkill
#WallAutokillExpire
EndModule
Module operserv/news
NewsDB "news.db"
EndModule
Module operserv/sessions
ExceptionDB "exception.db"
# Kaç Giris Olacak 8 Normal
DefSessionLimit 25
MaxSessionLimit 100
ExceptionExpiry 1d
SessionLimitExceeded "The session limit for your host% has been exceeded."
#SessionLimitDetailsLoc "Please visithttp://your.website.url for more information about session limits."
#SessionLimitAutokill 10s 5 30m "Exceeding session limit"
#WallO***ception
#WallExceptionExpire
EndModule
################################ S-line module settings
Module operserv/sline
SlineDB "sline.db"
SGlineReason "Invalid real name"
#SGlineReason "Invalid real name: %s"
SQlineReason "Reserved nickname"
SQlineReason "Kullandığınız rumuz kullanıma kapalı yada bir yöneticiye ait: %s"
SZlineReason "You are banned from this network"
#SZlineReason "Z-lined: %s"
#ImmediatelySendSline
SGlineExpiry 30d
#SQlineExpiry 30d
SZlineExpiry 30d
#WallOSSline
#WallSlineExpire
SQlineIgnoreOpers
SQlineKill
EndModule
###########################################################################
#
# NickServ configuration
#
###########################################################################
Module nickserv/main
NickServName "NickServ" "Nickname Server"
NickServDB "nick.db"
NSEnableRegister
NSRegEmailMax 5
NSRequireEmail
NSRegDelay 5m
NSInitialRegDelay 1m
NSDefKill
#NSDefKillQuick
NSDefSecure
#NSDefPrivate
#NSDefHideEmail
#NSDefHideUsermask
#NSDefHideQuit
NSDefMemoSignon
NSDefMemoReceive
N***pire 30d
N***pireWarning 3d
NSSuspendExpire 25d 5d
NSShowPassword
NSEnforcerUser enforcer
#NSEnforcerUser
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
NSForceNickChange
NSReleaseTimeout 30s
#NSAllowKillImmed
NSListOpersOnly
NSListMax 50
NSSecureAdmins
NSEnableDropEmail
NSDropEmailExpire 10m
NSHelpWarning
EndModule
################################ Access list module
Module nickserv/access
NSAccessMax 32
NSFirstAccessEnable
NSFirstAccessWild
EndModule
################################ Autojoin module
Module nickserv/autojoin
NSAutojoinMax 10
EndModule
################################ Link module
Module nickserv/link
NSLinkMax 2
EndModule
################################ Authentication module
Module nickserv/mail-auth
NSNoAuthExpire 3m
NSSendauthDelay 1h
EndModule
################################ SENDPASS module
Module nickserv/sendpass
NSSendpassDelay 1h
EndModule
###########################################################################
#
# ChanServ configuration
#
###########################################################################
Module chanserv/main
ChanServName "ChanServ" "Channel Server"
ChanServDB "chan.db"
CSEnableRegister
#CSRegisteredOnly
CSMaxReg 10
CSDefKeepTopic
CSDefSecureOps
#CSDefPrivate
CSDefTopicLock
CSDefLeaveOps
#CSDefSecure
CSDefOpNotice
#CSDefEnforce
#CSDefHideEmail
#CSDefHideTopic
#CSDefHideMlock
C***pire 14d
CSSuspendExpire 12d 2d
CSShowPassword
CSAccessMax 1024
CSAutokickMax 80
CSAutokickReason "User has been banned from the channel"
CSInhabit 15s
CSRestrictDelay 15s
CSListOpersOnly
CSListMax 50
CSForbidShortChannel
EndModule
################################ SENDPASS module
Module chanserv/sendpass
CSSendpassDelay 1h
EndModule
###########################################################################
#
# MemoServ configuration
#
###########################################################################
Module memoserv/main
MemoServName "MemoServ" "Memo Server"
MSMaxMemos 20
#M***pire 1500d
#M***pireUnread
MSSendDelay 3s
MSNotifyAll
EndModule
################################ FORWARD module
Module memoserv/forward
MSAllowForward
MSForwardDelay 10s
EndModule
################################ IGNORE module
Module memoserv/ignore
MSIgnoreMax 32
EndModule
###########################################################################
#
# StatServ configuration
#
###########################################################################
Module statserv/main
StatServName "StatServ" "Statistics Server"
StatServDB "stats.db"
SSOpersOnly
EndModule
# Burdan Asagidaki Ayarlar Biraz Karisik
# O Yüzden Lütfen Dokunmayiniz. Basinda Açiklama Olmayan Satirlara
# Dokunmaniz Tavsiye Edilmez.
###########################################################################
#
# HTTP server modules
#
###########################################################################
Module httpd/main
# ListenTo <address>:<port> [REQUIRED]
# Specifies the address and port number on which the HTTP server
# will listen for incoming requests. <address> may be specified as
# an IP address (first example below), a hostname (second example),
# or the special string "*", which means "any IP address" (third
# example).
#
# When a hostname is given, as in the second example below,
# Services will look up the address(es) associated with the
# hostname at startup time, and bind to every IP address found.
# This can be useful, for example, with dynamic DNS, in which
# the server's IP address changes periodically; however, the
# hostname lookup can take time--especially if there is no DNS
# server on the local network--and is susceptible to network or
# DNS server outages, so IP addresses or "*" should be used
# whenever possible.
#
# Note that many systems restrict low port numbers to the system
# administrator; in particular, Unix-like systems allow only the
# root user (UID 0) to use ports less than 1024.
#ListenTo 127.0.0.1:12701
#ListenTo services.example.net:8080
#ListenTo *:80
# ListenBacklog [REQUIRED]
# Specifies the maximum number of connections that can be received
# by the operating system without being accepted by Services (the
# second parameter, `backlog', to the listen() system call). If
# you start seeing refused or delayed connections on a busy server,
# try increasing this value.
#
# If you don't understand the above, leave this setting alone.
ListenBacklog 5
# RequestBufferSize <bytes> [REQUIRED]
# Specifies the size of the buffer allocated for each HTTP request.
# Note that this buffer is allocated for every connection, and an
# additional amount of memory will be allocated for header pointers
# (in the pathological case this extra amount could reach 4/3 of
# the value given for this directive). If a client sends a request
# (including POST data) exceeding this value, an error will be
# returned and the connection terminated.
#
# If you don't understand the above, leave this setting alone.
RequestBufferSize 4096
# MaxConnections <count> [RECOMMENDED]
# Specifies the maximum number of simultaneous connections allowed.
# If not given, no limit is placed on the number of connections;
# however, the operating system may impose its own limits, which
# are not under the control of Services.
MaxConnections 10
# MaxRequests <count> [RECOMMENDED]
# Specifies the maximum number of requests that can be made over a
# single connection before the server disconnects it. If not
# given, no limit is placed on the number of requests per
# connection; note that this may allow malicious users to interfere
# with Services' normal operations by sending large numbers of
# requests over a single connection.
MaxRequests 20
# IdleTimeout <time> [RECOMMENDED]
# Specifies the length of time a connection can be idle (not
# sending data) before it will be automatically closed. If not
# given, connections will never be closed automatically.
IdleTimeout 30s
# LogConnections [OPTIONAL]
# If given, a log message will be written for each connection to
# the server.
LogConnections
EndModule
################################ IP address authorization module
Module httpd/auth-ip
# AllowHost <path> <address> [OPTIONAL]
# DenyHost <path> <address> [OPTIONAL]
# Specifies which hosts will be allowed (or not allowed) to access
# resources provided by the HTTP server. The <path> parameter is a
# URL path (not including the "http://host.name"), and matches any
# URL which begins with the same string; for example, "/dir"
# matches both "/dir/file" and "/dirty". The <address> can be an
# IP address, a hostname (as with ListenTo in the main server
# module, all addresses associated with the hostname will be
# allowed or denied), the string "*" (which means all addresses),
# or the special format "<IP-address>/<mask>", where <mask> is an
# integer from 1 to 31 giving the number of bits in the subnet
# address, which indicates that the entire subnet of addressess
# specified should be allowed or denied; for example,
# "192.168.1.64/26" represents the range of addresses from
# 192.168.1.64 to 192.168.1.127.
#
# Examples:
# AllowHost /debug 127.0.0.1 # Allow all requests from localhost
# # to the debug page
# AllowHost / 192.168.0.0/24 # Allow any host in the 192.168.0.*
# # network access to the entire server
# DenyHost / shell.example.org # Deny connections from any address
# # associated with shell.example.org
#
# Multiple AllowHost or DenyHost directives for the same path may
# be used to specify multiple addresses to allow or deny. Each
# condition will be checked in the order they are listed here, and
# the first matching one will be used. For example, these lines:
# AllowHost / 192.168.0.1
# DenyHost / 192.168.0.0/24
# deny access to all hosts in the 192.168.0.* network _except_
# 192.168.0.1. However, the reverse:
# DenyHost / 192.168.0.0/24
# AllowHost / 192.168.0.1
# simply blocks all hosts in the 192.168.0.* network, since the
# first rule matches 192.168.0.1 and the second is never checked.
#
# Access to the entire server can be allowed or denied by using the
# path "/", which matches every URL (since all URLs begin with a
# slash). It is good practice to include such a rule after all
# others to explicitly indicate what should be done with requests
# that do not match any other rule. (If a request does not match
# any rules at all, it is implicitly allowed, but this behavior may
# change in the future and should not be relied on.) For example:
# AllowHost / *
# or:
# DenyHost / *
#
# WARNING: Hostnames are resolved only once at startup; any changes
# in a host's IP address will not be seen by Services.
#
# Note: These directives are listed as "optional" only because the
# module will still load even if no directives are listed;
# however, unless AllowHost/DenyHost directives are given,
# the module will not have any effect.
AllowHost / *
EndModule
################################ Password authorization module
Module httpd/auth-password
# AuthName <name> [REQUIRED]
# Specifies the name to be used by the user's browser when asking
# for a password (as in "Enter username and password for <name>:").
AuthName "IRC Services"
# Protect <path> <user>:<pass> [OPTIONAL]
# Sets the URLs (paths) which will be protected by password
# authorization, and the username and password for each path. The
# username and password can be different for each path. The path
# given will match any URL beginning with that string, as with the
# auth-ip module.
#
# Examples:
# Protect /debug "debug:debug"
# Protect /~ "nickuser:nickpass"
#
# Note: This directive is listed as "optional" only because the
# module will still load even if no directives are listed;
# however, unless Protect directives are given, the module
# will not have any effect. Use a path of "/" to apply
# password protection to the entire server.
EndModule
################################ Database access module
Module httpd/dbaccess
# NOTICE: This module allows complete access to all Services data;
# be certain to protect it from unauthorized access using
# authorization modules or other means.
# Prefix <path> [REQUIRED]
# Sets the URL (path) at which database access will be accessible.
# If this does not end with a slash, one will be appended
# automatically. Access is provided using the following directory
# tree:
#
# <path>/ Main menu
# <path>/operserv/ OperServ data and menu
# <path>/operserv/akill/ Autokill list
# <path>/operserv/news/ News item list
# <path>/operserv/sessions/ Session and exception lists
# <path>/operserv/sline/ S-line lists
# <path>/nickserv/ Nickname list and information
# <path>/chanserv/ Channel list and information
# <path>/statserv/ Network statistics
# <path>/xml-export/ XML-format database download
#
# Categories for which the relevant module is not loaded will not
# be accessible.
#
# WARNING: These functions, particularly the XML export function,
# can cause Services to stop for a significant period of
# time while they are processed!
#
# This is commented out by default; make sure you implement proper
# access protection (see above) before uncommenting it.
#Prefix "/dbaccess"
EndModule
################################ Debug page module
Module httpd/debug
# DebugURL <path> [REQUIRED]
# Sets the URL (path) at which the debug page will be accessible.
# This must begin with a slash.
DebugURL "/debug"
EndModule
################################ Nick/channel redirect module
Module httpd/redirect
# NicknamePrefix <path> [OPTIONAL]
# Sets the URL (path) at which nickname redirects will be
# accessible; all characters after this prefix, up to the next
# slash, will be taken as the nickname. This must begin with a
# slash. The default value, "/~", emulates the traditional home
# page URL of "
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
If you use a
# directory name instead, it must end with a slash, for example:
# "/nickname/". See also ChannelPrefix, below.
#
# If not set, nickname redirects will not be done.
NicknamePrefix "/~"
# ChannelPrefix <path> [OPTIONAL]
# Sets the URL (path) at which channel redirects will be
# accessible; all characters after this prefix, up to the next
# slash, will be taken as the channel name (without the leading
# "#", which cannot be used in URLs). The path must begin with
# a slash. The default value, "/channel/", gives URLs like
# "http://services.example.net/channels/channelname/" for channel
# "#channelname".
#
# If not set, channel redirects will not be done.
#
# Note: If a URL could be interpreted as both a nickname URL and a
# channel URL, the nickname will take precedence, even if it
# is not registered or does not have a URL associated with it.
ChannelPrefix "/channel/"
EndModule
################################ Top page module
Module httpd/top-page
# Filename <path> [<content-type>] [OPTIONAL]
# Sets the name of a file to be delivered as the server's top page.
# If this does not begin with a slash, then it is taken as relative
# to the Services data directory. The second parameter specifies
# the MIME content type of the file; if not given, it defaults to
# text/html.
#Filename "Top Page.txt" text/plain
#Filename /var/
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
Redirect <URL> [OPTIONAL]
# Sets a URL to be provided as a redirect to a client accessing the
# top page. This must be a full URL, beginning with "http://" (or
# some other protocol specifier). If both Filename and Redirect
# are given, Redirect takes precedence.
#Redirect
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
EndModule
###########################################################################
#
# Miscellaneous modules
#
###########################################################################
################################ DevNull settings
Module misc/devnull
# DevNullName <nick> <string> [REQUIRED]
# Specifies the nickname (first parameter) and "real" name (second
# parameter) used by the DevNull pseudoclient.
DevNullName "DevNull" "/dev/null -- message sink"
EndModule
################################ HelpServ settings
Module misc/helpserv
# HelpServName <nick> <string> [REQUIRED]
# Specifies the nickname (first parameter) and "real" name (second
# parameter) used by the HelpServ pseudoclient.
HelpServName "HelpServ" "Help Server"
# HelpDir <dirname> [REQUIRED]
# Specifies the name of the subdirectory containing help files for
# HelpServ.
HelpDir helpfiles
EndModule
################################ XML export settings
Module misc/xml-export
# This module has no configurable settings.
EndModule
################################ XML import settings
Module misc/xml-import
# OnNicknameCollision <action> [OPTIONAL]
# Specifies the action to be taken when a nickname in the data to
# import is already registered. The string must be one of either
# "skipgroup" (skip over the nickname group containing the nickname
# in the imported data), "skipnick" (skip only the colliding
# nickname), "overwrite" (drop the existing nickname), or "abort"
# (do not import any data). Note that when "abort" is selected,
# the entire XML input is still checked for errors, but Services
# will abort before actually merging any data.
#
# When using "overwrite", if a nickname group has only one nickname
# and that nickname is overwritten, the nickname group will be
# dropped as well. As a consequence, any channels owned by such a
# nickname will be dropped (or shifted to their successors) as
# well. All nicknames and channels overwritten or droppde in this
# manner will be displayed on standard error.
#
# If not specified, defaults to "skipgroup".
#OnNicknameCollision skipgroup
# OnChannelCollision <action> [OPTIONAL]
# Specifies the action to be taken when a channel in the data to
# import is already registered. The string must be one of either
# "skip" (skip over the channel in the imported data), "overwrite"
# (drop the existing channel), or "abort" (do not import any data).
# Note that when "abort" is selected, the entire XML input is still
# checked for errors, but Services will abort before actually
# merging any data. If not specified, defaults to "skip".
#OnChannelCollision skip
# VerboseImport [OPTIONAL]
# Causes a detailed list of imported nicknames, channels, and other
# data to be printed to standard output.
VerboseImport
EndModule
|
